About Contact Distributors News My Lindapter English American Deutsch French
You are here: Home > Assemblies
 
Products
 
Markets
Assembly Selector

New Hollo-Bolt Brochure launched at NASCC

Lindapter has released its brand new Hollo-Bolt brochure at the recent NASCC Steel Conference in Texas.     (Click image to...
More [+]

Lindapter Distributor Opens in New Jersey

Responding to the increased demand of Lindapter Steel Connections, distributor UCCSC (UCC Steelwork Connections Inc) has opened a new inventory...
More [+]

Clarity for Specifiers and Buyers

Lindapter USA would like to remove any potential confusion and confirm that LNA Solutions are not an authorized Lindapter distributor and are not...
More [+]
...

Assemblies

GC001-1

Lindapter Girder Clamp assembly suitable for securing W / HP / S / C / MC sections at 90 degrees to each other.

Available in sizes ½" to 1".

Tensile capacity range 5,200lbs to 17,715lbs.

Frictional capacity range 315lbs to 2,023lbs view assembly »

GC001-3

Lindapter Girder Clamp assembly suitable for securing C / S / MC beams / sections with 8 degree sloping flanges (or greater) at 90 degrees to W / HP sections.

Available in sizes ½" to 1".

Tensile capacity range 5,200lbs to 17,715lbs.

Frictional capacity range 315lbs to 2,023lbs. view assembly »

GC001-4

Lindapter Girder Clamp assembly suitable for securing W / HP / S / C / MC sections in situations which require angular crossovers.

Available in sizes ½" to 1".

Tensile capacity range 5,200lbs to 17,715lbs.

Frictional capacity range 315lbs to 2,023lbs view assembly »

GC001-5

M16 Lindapter Flush Clamp assembly suitable for securing W / HP / S / C / MC sections together without the need for a location plate between the flanges.

Angular cross over range 45 to 90 degrees (dependant section widths).

Tensile capacity 6,745lbs.

Frictional capacity 1,686lbs. view assembly »

GC001-6

Lindapter Girder Clamp assembly suitable for securing W / HP / S / C / MC beams at 90 degrees below fabriacted sections.

Available in sizes ½" to 1".

Tensile capacity range 5,200lbs to 17,715lbs.

Frictional capacity range 315lbs to 2,023lbs. view assembly »

GC001-7

Lindapter high friction Girder Clamp assembly suitable for securing W / HP / S /C / MC beams at 90 degrees below fabriacted sections.

Available in sizes ½" to 1".

Tensile capacity range 7,644lbs to 56,200lbs.

Frictional capacity range 1,530lbs to 15,736lbs. view assembly »

GC001-8

Lindapter high friction Girder Clamp assembly suitable for securing W / HP / S /C / MC sections at 90 degrees to each other.

Available in sizes ½" to 1".

Tensile capacity range 7,644lbs to 56,200lbs.

Frictional capacity range 1,530lbs to 15,736lbs. view assembly »

GC001-9

Lindapter Girder Clamp assembly suitable for securing W / HP / S / C / MC beams at 90 degrees below fabricated sections. The assembly uses adjustable clamps to increase the reach on to steel flange.

Available in sizes ½" to 1".

Tensile capacity range 5,200lbs to 17,715lbs.

Frictional capacity range 315lbs to 2,023lbs. view assembly »

GC002-1

Lindapter Girder Clamp assembly suitable for securing W / HP / S / C / MC sections of same width parallel and below each other.

Available in sizes ½" to 1".

Tensile capacity range 5,200lbs to 17,715lbs.

Frictional capacity range 315lbs to 2,023lbs. view assembly »

GC002-2

Lindapter Girder Clamp assembly suitable for securing End plates to W / HP / S / C / MC sections of same width.

Available in sizes ½" to 1".

Tensile capacity range 5,200lbs to 17,715lbs. view assembly »

GC002-3

Lindapter Girder Clamp assembly suitable for securing W / HP / S / C / MC sections with different widths parallel and below each other.

Available in sizes ½" to 1".

Tensile capacity range 5,200lbs to 17,715lbs.

Frictional capacity range 315lbs to 2,023lbs. view assembly »

GC002-4

Lindapter arrangement suitable for securing W / HP / S / C / MC sections together in parallel / unequal width conditions.

Available in sizes ½" to 1".

Tensile capacity range 5,200lbs to 17,715lbs.

Frictional capacity range 315lbs to 2,023lbs view assembly »

GC003-1

Lindapter Girder Clamp assembly suitable for securing W / HP / S / C / MC beams at 90 degrees to each other with inclined top section.

Available in sizes ½" to 1".

Tensile capacity range 5,200lbs to 17,715lbs.

Frictional capacity range 315lbs to 2,023lbs. view assembly »

GC003-2

Lindapter Girder Clamp assembly suitable for securing W / HP / S / C / MC beams at 90 degrees to each other with inclined top section. This type of arrangement with a fabricated stool is suitable for conditions where a large gap between the sections is required.

Available in sizes ½" to 1".

Tensile capacity range 5,200lbs to 17,715lbs.

Frictional capacity range 315lbs to 2,023lbs. view assembly »

GC003-3

Lindapter high friction arrangement for securing end plate to inclined section.

Available in sizes ½" to 1"

Tensile capacity range 7,644lbs to 56,200lbs.

Fricional capacity range 1,530lbs to 15,736lbs. view assembly »

GC003-4

Lindapter Girder Clamp assembly suitable for securing W / HP / S / C / MC beams at 90 degrees to each other with inclined top section. This type of arrangement with a fabricated stool is suitable for conditions where a large gap between the sections is required.

Available in sizes ½" to 1".

Tensile capacity range 7,644lbs to 56,200lbs.

Frictional capacity range 1,530lbs to 15,736lbs. view assembly »

GC004-1

Lindapter Girder Clamp assembly suitable for securing W / HP / S / C / MC beams at 90 degrees to each other with fixed drop between. This type of arrangement with a fabricated stool is suitable for conditions where a large gap between the sections is required.

Available in sizes ½" to 1".

Tensile capacity range 5,200lbs to 17,715lbs.

Frictional capacity range 315lbs to 2,023lbs. view assembly »

GC004-2

Lindapter Girder Clamp assembly suitable for securing W / HP / S / C / MC beams at 90 degrees to each other with adjustable drop between.

Available in sizes ½" to 1".

Tensile capacity range 5,200lbs to 17,715lbs.

view assembly »

GC004-3

Lindapter high friction Girder Clamp assembly suitable for securing W / HP / S / C / MC beams at 90 degrees to each other with adjustable drop between.

Available in sizes ½" to 1".

Tensile capacity range 7,644lbs to 56,200lbs. view assembly »

GC004-4

Lindapter arrangement suitable for securing End Plates to S / C / MC beams / sections with 8 degree sloping flanges (or greater).

Available in sizes ½" to 1".

Tensile capacity range 5,200lbs to 17,715lbs.

Frictional capacity range 315lbs to 2,023lbs. view assembly »

GC004-5

Lindapter high friction arrangement for securing end plate to W / HP / S / C / MC sections.

Available in sizes ½" to 1".

Tensile capacity range 7,644lbs to 56,200lbs.

Fricional capacity range 1,530lbs to 15,736lbs. view assembly »

GC005-1

Lindapter Girder Clamp assembly suitable for securing W / HP / S / C / MC beams which are located on the inside flange of a parallel section.

Available in sizes ½" to 1".

Suitable for positional conditions. view assembly »

GC005-2

Lindapter Girder Clamp assembly suitable for securing W / HP / S / C / MC beams which are located on the both flanges of a parallel section.

Available in sizes ½" to 1".

Suitable for positional conditions. view assembly »

GC006-1

Lindapter Girder Clamp assembly suitable for securing channels (toes down) at 90 degrees below W / HP / S / C / MC sections.

Available in sizes ½" to 1".

Tensile capacity range 5,200lbs to 13,264lbs. view assembly »

GC006-2

Lindapter Girder Clamp assembly suitable for securing a channel at 90 degrees below W / HP / S / C / MC sections.

Available in sizes ½" to 1".

Tensile capacity range 5,200lbs to 17,715lbs. view assembly »

GC006-3

Lindapter Girder Clamp assembly suitable for securing a channel at 90 degrees below W / HP / S / C / MC sections.

Available in sizes ½" to 1".

Tensile capacity range 5,200lbs to 17,715lbs. view assembly »

GC006-4

Lindapter Girder Clamp assembly suitable for securing channel to channel crossing at 90 degrees to each other.

Available in sizes ½" to 1".

Tensile capacity range 7,644lbs to 23,600lbs.

Frictional capacity range 1,530lbs to 7,194lbs. view assembly »

GC006-5

Lindapter Girder Clamp assembly suitable for securing channel to channel crossing at 90 degrees to each other without the need for a location plate.

Available in sizes ½" to 1".

Tensile capacity range 7,644lbs to 23,600lbs.

Frictional capacity range 1,530lbs to 7,194lbs. view assembly »

GC007-1

Lindapter Girder Clamp assembly suitable for locating a channel on top of existing W / HP / S / C MC sections.

Available in sizes ½" to 1".

Suitable for position conditions. view assembly »

GC007-2

Lindapter Girder Clamp assembly suitable for securing a channel at 90 degrees above W / HP / S / C / MC sections.

Available in sizes ½" to 1".

Tensile capacity range 5,200lbs to 17,715lbs. view assembly »

GC008-2

Lindapter Girder Clamp assembly suitable for securing Angle at 90 degrees below W / HP / S / C / MC sections.

Available in sizes ½" to 1".

Tensile capacity range 5,200lbs to 13,264lbs.

Frictional capacity range 315lbs to 1,350lbs. view assembly »

GC008-3

Lindapter Girder Clamp assembly suitable for securing Angle to Channel crossing at 90 degrees.

Available in sizes ½" to 1".

Tensile capacity range 7,644lbs to 23,600lbs.

Frictional capacity range 1,530lbs to 7,194lbs. view assembly »

GC008-4

Lindapter Girder Clamp assembly suitable for securing Angle to Angle crossing at 90 degrees.

Available in sizes ½" to 1".

Tensile capacity range 7,644lbs to 23,600lbs.

Frictional capacity range 1,530lbs to 7,194lbs. view assembly »

GC009-1

Lindapter 6 bolt high friction arrangement for securing end plate to vertical column section.

Available in sizes ½" to 1"

Tensile capacity range 11,465lbs to 84,300lbs.

Fricional capacity range 2,293lbs to 23,605lbs.

. view assembly »

GC009-2

Lindapter high friction arrangement for securing end plate to vertical column section.

Available in sizes ½" to 1"

Tensile capacity range 7,644lbs to 56,200lbs.

Fricional capacity range 1,530lbs to 15,736lbs. view assembly »

page 1
 
2
 
3
 
4
 
5
 
6
 
7
 
8
 
9
 
10
 
11
 
12
 
13
 
14
 
15
 
16
 
17
 
18
 
TEXT SIZE: A/A/A
© Lindapter International. All rights reserved
Terms Privacy Contact Links News web design